mazda

Showing 17–32 of 41 results

  • WARN TABOR 8K

    WARN TABOR 8K

    Great for Lighter Trucks, Jeeps and SUVsA full 8,000 lb. pulling capacity makes this winch great for lighter trucks, Jeeps, and SUVs. Quick line speed, durable construction, and WARN dependability ensure this winch will come through time and time again.
    Legendary WARN reliability and performance; 8,000 lb. (3630 kg) capacity
    Low-profile design will fit most trucks and SUVs
    Separate control pack for various mounting options
    Exclusive brake design for superior winching control
    Durable, smooth, and reliable three-stage planetary geartrain
    Series-wound motor for power and fast line speed
    Remote control with 12’ (3.7m) lead
    94’ of 5/16” (28.6m of 8mm) diameter wire rope

    Read more
    Quick View
  • WARN M8274 50

    WARN M8274 50

    Fastest line speed, longest wire rope, legendary performanceLoved by off-roaders who compete, it’s our fastest winch. No-load retrieval speed for the M8274-50 is 79.3 feet per minute, and that’s not all. At 150 ft. of 5/16” cable, it also has a very long line capacity. Its unique spur gear drivetrain and upright design are totally rugged. Its braking system delivers smooth operation with superior heat dissipation. Roller fairlead, remote control on 12-ft. lead, free spool clutch and battery cables are included.
    Rugged spur-gear drive train and unique upright design
    Automatic disc braking system delivers smooth operation with superior heat dissipation
    Roller fairlead, remote control, free spool clutch, and battery cables are included.

    Read more
    Quick View
  • WARN 9.5 XP

    WARN 9.5 XP

    Fast, powerful and reliable – for extreme conditionsThe 9.5xp Extreme Performance winch is designed to offer the highest performance in the harshest conditions. From its fast line speeds and strong 4,310 kg pull rating, to its extreme-duty sealing and contactor control, the 9.5xp is the winch you want when the trail gets tough.
    Series-wound winch motor is powerful and reliable
    Extreme-duty winch sealing. Enables superior water resistance
    Exclusive brake design. Provides superior operator control when winching
    Extended-duty control pack delivers long duty cycle to help you tackle the most demanding pulls
    3-stage planetary geartrain for fast, smooth, reliable operation
    Remote-mount control box allows for a variety of mounting configurations
    Includes both corded and wireless winch controls
    High-gloss, chip-resistant powder-coated finish provides superior corrosion resistance
    100’ (30m) of steel

    Read more
    Quick View
  • WARN 9.5 TI

    WARN 9.5 TI

    The 9.5ti packs 9500lbs of pulling capacity into a massive 12.5lb aluminum die-cast body. The new shape not only looks great, but sheds the elements like no other winch on the market: seals at the key points give extreme-duty water resistance. A Gen II Bosch motor delivers just the right balance between torque and speed. Plus another Warn Industries first – operator feedback – the thermometric indicator gives the operator information about motor temperature during the winching operation.

    The 9.5ti includes winch, wiring for the front of vehicle. Includes remote with integrated flashlight.

    Read more
    Quick View
  • PROCOMP MX6

    PROCOMP MX6

    MX Series shocks are precision engineered and custom valved for specific vehicle applications to maximize ride comfort, handling and load carrying ability. Step up to quality, precision and maximum adjustability with the MX6. Each MX6 is precision engineered and custom valved for your vehicle. The MX6’s inverted mounting design reduces unsprung weight and protects the shock body from damage. This design also allows ease of fitment with no clearance problems in highperformance late model vehicle applications. Applications for most popular jeeps, pickups and SUV’s including lifted vehicles and HD models. Who says you can’t perfectly dial in your ride?

    Read more
    Quick View
  • PROCOMP ES 1OOO

    PROCOMP ES 1OOO

    The ES 1000 performance series shock absorber is designed to replace the factory shock and provides optimum performance enhancing driving comfort and vehicle control. To provide a superior seal for the S-924 high temperature shock fluid, a multi- lip, spring tensioned rod seal is used. Utilizing a 1 3/8” nylon banded full displacement piston head and double welded shock mounts, the ES 1000 assures strength and long lasting durability for even the most demanding of driving conditions.

    Read more
    Quick View
  • PIAK TOW BAR MAZDA BT50

    PIAK TOW BAR MAZDA BT50

    Using only high quality components and refusing to cut corners, each PIAK tow bar is custom built to suit a particular hull. The bars are CAD designed using a series of very specific and precise hull measurements.
    it creates a lower centre of gravity which improves towing, launching, and retrieving.

    Read more
    Quick View
  • RIDE PIN AND CLIP

    RIDE PIN AND CLIP

    R-clips are commonly used to secure the ends of round shafts such as axles and clevis pins. The straight leg of the R-clip is pushed into a hole near one end of the shaft until the semicircular “belly” in the middle of the other, bent leg of the R-clip grips one side of the shaft resisting any force removing the R-clip from its hole. To assist insertion the end of the bent leg is angled away from the straight leg. This angled end rides the side of the shaft and opens the “belly” mouth enough to pass the widest part of the shaft as the R-clip is inserted.
    There is also a double loop variety when a wider range of suitable shafts is required. It also spreads out the stresses more evenly for a longer life.
    This type of pin is usually made of round wire of a harder metal than is appropriate for traditional cotter pins.
    R-clips are similar in function to split pins and linchpins. Compared to split pins, they are easier to remove and are re-usable.

    Read more
    Quick View
  • RIDE PINTLE ADAPTER MOUNT

    RIDE PINTLE ADAPTER MOUNT

    Our line of mounting brackets allow for installation of electrical wiring plugs on vehicles without damage to bumpers or fascia trim. L-brackets are designed to attach above or below receiver cross tube with hose clamp.

    Read more
    Quick View
  • DRAWTITE TRAILER COUPLER

    DRAWTITE TRAILER COUPLER

    The most popular coupler mechanism ever developed, the Fas-Lok® originated as a Fulton brand and is offered in a full line of SAE Class I through IV rated straight tongue stamped couplers. The Fas-Lok® latching mechanism allows quick and easy trailer hook-up, and is factory adjusted for end user convenience.

    Read more
    Quick View
  • DRAWTITE BALL MOUNT

    DRAWTITE BALL MOUNT

    A tried-and-true design makes this ballmount one of our most popular sellers. The angle-cut design allows the ballmount to slide in your hitch with ease and its 6,000 lb capacity makes it sturdy enough for even your longest hauls. This ballmount provides 8-1/2 inches of clearance from the hitch pin hole and requires a hitch ball with a 1 inch shank.
    Angle-cut tube allows ball mount to slide easily into the receiver hitch
    Fits 2” x 2” receiver-style hitches
    Uses ball with 1” shank diameter
    Measures 8-1/2” long from center of pin hole to center of ball hole
    Provides 3/4” rise or 2” drop from the top of your hitch’s receiver tube
    Rated for up to 7,500 lbs GTW and up to 750 lbs TW
    Requires pin and clip (sold separately) to secure in hitch receiver

    Read more
    Quick View
  • DRAW TITE HITCH

    DRAW TITE HITCH

    Draw-Tite’s trailer hitch is a receiver-style hitch perfect for light-duty towing and hitch rack needs, the Draw-Tite “Tested Tough’ guarantee ensures that this hitch exceeds industry strength standards.
    Draw-Tite begins with Computer Aided Design (CAD) matched to manufacturer & model year for a perfect fit and top towing performance. Draw-Tite combines this with solid, all-welded construction for maximum performance and safety under the toughest conditions. The E-coat base with black powder coat finish keeps your hitch looking good and resists corrosion for many years of service.
    Bolt-on installation with no welding required, and complete hardware kit and installation instructions are included.

    Read more
    Quick View
  • DRAW TITE SPORTS HITCH

    DRAW TITE SPORTS HITCH

    The most trusted name in trailer hitches, Draw-Tite has been at the forefront of trailer hitch design and engineering since their first products were delivered in 1946. Every one of Draw-Tite’s wide range of designs and specialized equipment benefits from a long legacy of research and manufacturing that is unmatched in the industry.
    When it comes to engineered designs, Draw-Tite’s is second to none. Innovative low profile designs compliment the rear contours and aerodynamic styling of today’s vehicles. Custom designed hitches are specific to vehicle type and model year for simple installation and superior fit with a minimum of bumper cutting or drilling. Removable drawbars and ball mounts enhance the appearance of the vehicle when not in use. All Draw-Tite’s hitches meet or exceed V5 CSA and SAE J684 standards

    Read more
    Quick View
  • DRAWTITE PINTLE HOOK COMBINATION WITH HITCH BALL

    DRAWTITE PINTLE HOOK COMBINATION WITH HITCH BALL

    in different sizes and styles. Keep in mind the hitch ball weight rating should always be equal to or larger than the hitch and ball mount being used. A few simple steps will ensure that you Includes Mounting Hardware
    Tethered Locking Pin
    Black Finish
    The Gross Towing Weight is 16,000lbs.
    The Ball Rating is 14,000lbs.
    Shipping Weight: 15 lbs.
    3,000 lbs. maximum vertical load, 16,000 lbs. maximum GTW when used as pintle hook.
    Note: Never Exceed The Maximum Weight Rating Of The Receiver Hitch or O.E.M. Ratings Of The Tow Vehicle.

    Read more
    Quick View
  • DRAWTITE HITCH BALL

    DRAWTITE HITCH BALL

    in different sizes and styles. Keep in mind the hitch ball weight rating should always be equal to or larger than the hitch and ball mount being used. A few simple steps will ensure that you select the best hitch ball for your needs.
    Select the correct ball for the coupler on your trailer. The ball diameter required is stamped into the coupler handle or body
    Ensure the trailer ball shank fits the thickness and diameter of your drawbar, ball mount or step bumper
    During hitch ball installation, torque all 3/4” shank diameter balls to 160 ft. lbs., and 1” shank diameter balls to 250 ft. lbs., and 1-1/4” shank diameter balls to 450 ft. lbs.

    Read more
    Quick View
  • RIDE ROLL BAR

    RIDE ROLL BAR

    There are many different roll bar designs depending on the application, hence different 4WD organizations have differing specifications and regulations. They also help to stiffen the vehicle body, which is desirable in off-road applications.

    A roll bar is a single bar behind the driver that provides moderate roll-over protection.

    Read more
    Quick View