ALPHA GSE ISUZU DMAX
The Alpha GSE for the Isuzu Dmax is both practical and stylish. The elegant design follows the vehicle’s lines to give you a commercial canopy that is more than just a box. Our canopy is designed to offer you the maximum in convenience. With the innovative state of the art features and flowing lines, this is the best commercial canopy available on the market.
WARN 9.5 TI
WARN 9.5 TI
The 9.5ti packs 9500lbs of pulling capacity into a massive 12.5lb aluminum die-cast body. The new shape not only looks great, but sheds the elements like no other winch on the market: seals at the key points give extreme-duty water resistance. A Gen II Bosch motor delivers just the right balance between torque and speed. Plus another Warn Industries first – operator feedback – the thermometric indicator gives the operator information about motor temperature during the winching operation.
The 9.5ti includes winch, wiring for the front of vehicle. Includes remote with integrated flashlight.
WARN M8274 50
WARN M8274 50
Fastest line speed, longest wire rope, legendary performanceLoved by off-roaders who compete, it’s our fastest winch. No-load retrieval speed for the M8274-50 is 79.3 feet per minute, and that’s not all. At 150 ft. of 5/16” cable, it also has a very long line capacity. Its unique spur gear drivetrain and upright design are totally rugged. Its braking system delivers smooth operation with superior heat dissipation. Roller fairlead, remote control on 12-ft. lead, free spool clutch and battery cables are included.
Rugged spur-gear drive train and unique upright design
Automatic disc braking system delivers smooth operation with superior heat dissipation
Roller fairlead, remote control, free spool clutch, and battery cables are included.
Hi-Lift jacks are designed to help you survive in the harshest environments – from Mountains to the Jungles.
With over 100 years of quality, the Hi-Lift Jack is a rugged, highly versatile jack that puts you in command of situations requiring lifting, pushing, pulling, winching, and clamping. Although light in weight and easy to maneuver, the Hi-Lift Jack offers a rated capacity of 4,660 lbs (2114 kg) and a tested capacity of 7,000 lbs (3175 kg).
Only Hi-Lift Jacks are made with a two-piece handle and socket design that is built for extended life. Cheaper imitations use a one-piece design that bends easily if lateral pressure is applied while lifting a load.
Our jacks are designed to help you survive in the most demanding situations – whether you are in the Moab desert canyons, the Welsh Mountains, the Amazon jungle, or the farmlands of Indiana. With a full-range of specially designed accessories, the Hi-Lift jack is just about the most versatile piece of off-roading/farm/auto recovery equipment you can buy.
When it’s a heavy-duty situation, the tool had better be a Hi-Lift!
Hi-Lift Jack Specifications
- Approximate weight: 30lbs (14 kg)
- 4,660 lbs (2113.74 kg) rated capacity
- Tested capacity 7,000 lbs.
- Climbing pins of specially processed steel with 125,000 PSI tensile strength and 100,000 PSI yield.
- Steel bar is manufactured of specially rolled extra high carbon steel with 80,000 pound minimum tensile & carbon .69 to .82.
- Steel handle of 14gauge high-yield structural tubing with minimum yield of 55,000 PSI. 1 5/16″ diameter x 30″ long.
Hi-Lift Jack Features
- Every Jack comes complete with an adjustable top clamp/clevis for use in clamping and winching.
- Safety bolt is designed to shear at 7,000 lbs. (3175 kg)
- For speedy disengaging, lifting unit automatically drops away when load is removed.
- 4 1/2″ (11cm) long lifting nose for positive contact with load.
- Steel bar can be reversed for extra long life.
- Low pickup of 4 1/2″ (11cm).
- 28 square inch base plate.
DRAWTITE BALL MOUNT
DRAWTITE BALL MOUNT
A tried-and-true design makes this ballmount one of our most popular sellers. The angle-cut design allows the ballmount to slide in your hitch with ease and its 6,000 lb capacity makes it sturdy enough for even your longest hauls. This ballmount provides 8-1/2 inches of clearance from the hitch pin hole and requires a hitch ball with a 1 inch shank.
Angle-cut tube allows ball mount to slide easily into the receiver hitch
Fits 2” x 2” receiver-style hitches
Uses ball with 1” shank diameter
Measures 8-1/2” long from center of pin hole to center of ball hole
Provides 3/4” rise or 2” drop from the top of your hitch’s receiver tube
Rated for up to 7,500 lbs GTW and up to 750 lbs TW
Requires pin and clip (sold separately) to secure in hitch receiver