Description
CAMPERSHELLS MAGNUM ISUZU DMAX
The latest introduction to the Campershells line. It is exclusively designed for the latest pick-up trucks in the market. The new canopy design is rugged and sporty for one tough truck.
Related products
-
WARN M8274 50
Read more
WARN M8274 50
Fastest line speed, longest wire rope, legendary performanceLoved by off-roaders who compete, it’s our fastest winch. No-load retrieval speed for the M8274-50 is 79.3 feet per minute, and that’s not all. At 150 ft. of 5/16” cable, it also has a very long line capacity. Its unique spur gear drivetrain and upright design are totally rugged. Its braking system delivers smooth operation with superior heat dissipation. Roller fairlead, remote control on 12-ft. lead, free spool clutch and battery cables are included.
Rugged spur-gear drive train and unique upright design
Automatic disc braking system delivers smooth operation with superior heat dissipation
Roller fairlead, remote control, free spool clutch, and battery cables are included.Quick View -
DRAWTITE TRAILER COUPLER
Read more
DRAWTITE TRAILER COUPLER
The most popular coupler mechanism ever developed, the Fas-Lok® originated as a Fulton brand and is offered in a full line of SAE Class I through IV rated straight tongue stamped couplers. The Fas-Lok® latching mechanism allows quick and easy trailer hook-up, and is factory adjusted for end user convenience.
Quick View -
DRAWTITE BALL MOUNT
Read more
DRAWTITE BALL MOUNT
A tried-and-true design makes this ballmount one of our most popular sellers. The angle-cut design allows the ballmount to slide in your hitch with ease and its 6,000 lb capacity makes it sturdy enough for even your longest hauls. This ballmount provides 8-1/2 inches of clearance from the hitch pin hole and requires a hitch ball with a 1 inch shank.
Angle-cut tube allows ball mount to slide easily into the receiver hitch
Fits 2” x 2” receiver-style hitches
Uses ball with 1” shank diameter
Measures 8-1/2” long from center of pin hole to center of ball hole
Provides 3/4” rise or 2” drop from the top of your hitch’s receiver tube
Rated for up to 7,500 lbs GTW and up to 750 lbs TW
Requires pin and clip (sold separately) to secure in hitch receiverQuick View -
RIDE PIN AND CLIP
Read more
RIDE PIN AND CLIP
R-clips are commonly used to secure the ends of round shafts such as axles and clevis pins. The straight leg of the R-clip is pushed into a hole near one end of the shaft until the semicircular “belly” in the middle of the other, bent leg of the R-clip grips one side of the shaft resisting any force removing the R-clip from its hole. To assist insertion the end of the bent leg is angled away from the straight leg. This angled end rides the side of the shaft and opens the “belly” mouth enough to pass the widest part of the shaft as the R-clip is inserted.
There is also a double loop variety when a wider range of suitable shafts is required. It also spreads out the stresses more evenly for a longer life.
This type of pin is usually made of round wire of a harder metal than is appropriate for traditional cotter pins.
R-clips are similar in function to split pins and linchpins. Compared to split pins, they are easier to remove and are re-usable.Quick View
