JAOS VICTRON TRIBE 70

Related products

• 

  WARN 9.5 XP

  

  WARN 9.5 XP

  Fast, powerful and reliable – for extreme conditionsThe 9.5xp Extreme Performance winch is designed to offer the highest performance in the harshest conditions. From its fast line speeds and strong 4,310 kg pull rating, to its extreme-duty sealing and contactor control, the 9.5xp is the winch you want when the trail gets tough.
  Series-wound winch motor is powerful and reliable
  Extreme-duty winch sealing. Enables superior water resistance
  Exclusive brake design. Provides superior operator control when winching
  Extended-duty control pack delivers long duty cycle to help you tackle the most demanding pulls
  3-stage planetary geartrain for fast, smooth, reliable operation
  Remote-mount control box allows for a variety of mounting configurations
  Includes both corded and wireless winch controls
  High-gloss, chip-resistant powder-coated finish provides superior corrosion resistance
  100’ (30m) of steel

  Read more
  Quick View
• 

  DRAWTITE PINTLE HOOK COMBINATION WITH HITCH BALL

  

  DRAWTITE PINTLE HOOK COMBINATION WITH HITCH BALL

  in different sizes and styles. Keep in mind the hitch ball weight rating should always be equal to or larger than the hitch and ball mount being used. A few simple steps will ensure that you Includes Mounting Hardware
  Tethered Locking Pin
  Black Finish
  The Gross Towing Weight is 16,000lbs.
  The Ball Rating is 14,000lbs.
  Shipping Weight: 15 lbs.
  3,000 lbs. maximum vertical load, 16,000 lbs. maximum GTW when used as pintle hook.
  Note: Never Exceed The Maximum Weight Rating Of The Receiver Hitch or O.E.M. Ratings Of The Tow Vehicle.

  Read more
  Quick View
• 

  WARN TABOR 8K

  

  WARN TABOR 8K

  Great for Lighter Trucks, Jeeps and SUVsA full 8,000 lb. pulling capacity makes this winch great for lighter trucks, Jeeps, and SUVs. Quick line speed, durable construction, and WARN dependability ensure this winch will come through time and time again.
  Legendary WARN reliability and performance; 8,000 lb. (3630 kg) capacity
  Low-profile design will fit most trucks and SUVs
  Separate control pack for various mounting options
  Exclusive brake design for superior winching control
  Durable, smooth, and reliable three-stage planetary geartrain
  Series-wound motor for power and fast line speed
  Remote control with 12’ (3.7m) lead
  94’ of 5/16” (28.6m of 8mm) diameter wire rope

  Read more
  Quick View
• 

  RIDE PIN AND CLIP

  

  RIDE PIN AND CLIP

  R-clips are commonly used to secure the ends of round shafts such as axles and clevis pins. The straight leg of the R-clip is pushed into a hole near one end of the shaft until the semicircular “belly” in the middle of the other, bent leg of the R-clip grips one side of the shaft resisting any force removing the R-clip from its hole. To assist insertion the end of the bent leg is angled away from the straight leg. This angled end rides the side of the shaft and opens the “belly” mouth enough to pass the widest part of the shaft as the R-clip is inserted.
  There is also a double loop variety when a wider range of suitable shafts is required. It also spreads out the stresses more evenly for a longer life.
  This type of pin is usually made of round wire of a harder metal than is appropriate for traditional cotter pins.
  R-clips are similar in function to split pins and linchpins. Compared to split pins, they are easier to remove and are re-usable.

  Read more
  Quick View