JK Jeep Wrangler AEV Premium Front Bumper is built to withstand all the rigors of off road use, while maintaining a stylish and sophisticated appearance. The Front Bumper’s full width design, integrated grille and radiator guard and optional Skid Plate offer superior front end protection from rocks and brush without compromising approach angle. The standard heavy duty, chassis mounted tow points and optional Winch Mount will help get you out of trouble, but still look good doing it.

AEV’s all steel Heat Reduction Hood provides both fresh intake air and critical under hood cooling. With its clean, fluid  The central vent of the Heat Reduction Hood is positioned to take advantage of the low-pressure area created at the front edge of the Hood when the vehicle is in motion. Since air moves from high pressure to low pressure areas, the placement of the center vent causes cooler outside air to be drawn through the radiator and up through the Hood.lines, this hood’s design is not only functional but also adds distinctive styling to your JK.

Providing your engine with a clean supply of air is critical to your vehicle’s performance and longevity. AEV’s JK Snorkel air intake system is the essential engine protection accessory for overland adventurers whose exploration includes deep water crossings and dusty dirt roads. This snorkel is manufactured from extremely durable cross-linked polyethylene for maximum durability on the trail.

AEV’s 1/8” thick, stamped steel Front Skid Plate is not only good looking, but protects your sway bar, impact beam, and steering as well. The Front Skid Plate is designed to work with both our Premium Front Bumper and Tubeless Front Bumper. It has two dedicated lift points for a Hi-Lift Jack that holds the tongue in place beneath the bumper safely and prevents the jack from sliding sideways during use.

The Borah DualSport Wheel for the 2007-2018 JK Wrangler is AEV’s most versatile wheel to date. Designed as a dual purpose wheel, the Borah is available in a variety of configurations with either a fully-functional Beadlock Ring for running very low tire pressure off-road, a Protection Ring designed for street use as well as wheel protection off-road, or no ring for a simple, minimalist look. Both the Beadlock and Protection Rings are interchangeable, giving you the flexibility to run a Protection Ring on the street or upgrade to a functional Beadlock Ring for off-road use.

AEV Front and Rear Floor Liners add all-weather protection and distinctive styling to the interior of your JK. These injection molded, rubberized Floor Liners are constructed out of a premium, soft-touch material that retains its flexibility even in cold weather. AEV Floor Liners are precisely engineered to contour the floor pan of the JK and are deep enough to trap mud, snow and water without being obtrusive. Our unique button style attachment is similar to the attachment systems that many of the OE vehicle manufacturers are now using. This attachment system allows for a quick, snap-in installation and easy removal without having to fumble around with any hooks. Proudly made in the USA.

AEV’s ProCal Module is a hand-held powerhouse! This essential tool provides JK owners an easy, low-cost way to make a variety of useful changes not offered by the dealer or any other re-programmer. Topping the list is the ability to correct the speedometer and gear ratio when larger tires are installed. When the speedometer is left uncorrected, there is a major degradation in the performance of the stability control (ESP), transmission shifting, and engine performance.

The AEV JK Slider is a smooth differential skid plate that is designed not only to keep you from getting hung up on your differential but also to protect the lower CV joint. Built for the Dana 44 rear axle, this slider is made of 1/4? steel and comes with a black powdercoat finish.

AEV’s Rear Bumper and Tire Carrier is like having a giant Swiss Army knife on the back of your JK Wrangler. It is the perfect solution for carrying all of the necessities for a successful overland or backcountry excursion. Our system begins with the Rear Bumper, which provides robust protection against highway and trail impacts. Included in the Bumper are dual 2.4 gallon liquid storage tanks — which are particularly handy on multi-day trips — and mounting provisions for our AEV Splash Guards.

Built for ultimate protection, AEV’s Rear Corner Guards are not your run-of-the-mill corner guards.  With options for either the 2-door or the 4-door JK Wrangler they feature thick 1/8? stamped steel construction to protect the rear corners of your Jeep from all sorts of off-road abuse. In order to distribute impacts evenly we match the surface of the corner perfectly to the contour of the Wrangler’s corner. Corner Guards come with all hardware and have AEV’s 2 stage coating – e-coated then finished with a durable textured black powdercoat.

AEV’s Splash Guards for the JK Rear Bumper are the ideal solution for AEV Bumper owners who need to meet local highway regulations for adequate tread coverage, or who simply want to keep mud and debris under control.

AEV has molded these Splash Guards to perfectly match the contour of the Rear Bumper’s rock tubes and watertanks. The installation and removal of the guards is fast and simple, however the durable polyethylene construction has proven that it’s not even necessary to remove them for most off-road ventures. These things are amazingly durable!